Drips Under A Skylight In An Office Suite
Cracked curb flashing or dried frame sealant on skylights over office suites and lobbies.
Reflash the skylight curb, reseal the frame, and check the ceiling grid below for wet tiles.

Service Area
As a Fishers commercial roof repair contractor, we fix seams, drains, and curb flashing on retail and office roofs while the businesses below stay open.
Fishers commercial roof repair often means one roof over several businesses, so the work plan starts with which spaces leak and when each tenant is open.

Leaks in a strip center rarely line up with the roof seam directly above them. We mark each stained space, trace every stain to its own spot on the membrane, and group the repairs into one visit where the weather allows.
Noisy steps, such as cutting out wet insulation or running a hot-air welder near a rooftop unit, get timed for before opening or after close. Notice goes to tenants through the property manager, with the date and the spaces affected.
Multi-tenant roofs share drains and seams across spaces, so one problem can show up in two stores.
Cracked curb flashing or dried frame sealant on skylights over office suites and lobbies.
Reflash the skylight curb, reseal the frame, and check the ceiling grid below for wet tiles.
A single drain or seam failure upslope, with water spreading along deck flutes in both directions.
Trace both stains to the shared source, repair it once, and water-test before tiles are replaced.
Grease from the exhaust fan softening the membrane around the curb and flashing.
Replace the softened membrane, reflash the curb, and add a grease containment area under the fan.
A scupper or drain at the parapet clogged with leaves and debris from the parking lot side.
Clear and reflash the scupper or drain and check the parapet base flashing beside it.
A field seam on an older TPO roof where the weld has let go over several feet.
Clean the lap, probe its whole length, and weld a cover strip past both ends of the open section.
Owners, managers, and tenants each feel a roof repair in a different way on a shared building.
Most Fishers calls involve flat roof and leak repair, with metal and plant roofs on light industrial sites.

Seams, drains, blisters, and flashing on TPO, EPDM, and built-up roofs.
Flat Roof Repair in Noblesville
Fasteners, laps, rusted panels, and trim on metal roofs.
Commercial Metal Roof Repair in Noblesville
Ceiling stains traced to curbs, parapets, skylights, and edges.
Commercial Roof Leak Repair in Noblesville
Fan curbs, residue zones, walkways, and drains on plant roofs.
Industrial Roof Repair in NoblesvilleHave the property manager note which space and where the drip lands. Call with that, and we will plan one visit for every affected tenant.
Shared roofs over several businesses need the visit planned around more than one schedule.
The property manager names each tenant space with a stain, where in the space it shows, and the hours each business keeps.
Roof spots above every stain get checked: seams, drains, kitchen fan curbs, and parapet scuppers along the storefront side.
A single list with photos covers all spaces, so the manager can approve the work and pass dates to the tenants.
Cutting, welding, and debris removal near busy entrances happen before opening or after close, with quieter work during the day.
Finished repairs are photographed space by space, ready to forward to tenants or file with the lease records.
Need repairs elsewhere near Fishers? We work in these towns too; outside them, call us or send us a message.
8,503
Residents, 2020 Census
Metal shop and warehouse roofs with worn screws and laps.
McCordsville commercial roof repair3,106
Residents, 2020 Census
Farm buildings and shops, with wind damage on panels.
Sheridan commercial roof repair5,301
Residents, 2020 Census
Church halls and storefronts, scheduled around services.
Cicero commercial roof repair5,275
Residents, 2020 Census
Plant and farm roofs checked for heat-loosened seams.
Tipton commercial roof repairPopulation figures: U.S. Census Bureau, 2020 Census.

Question about your own roof?
Call UsYes. Flat roofs over offices and retail, and metal roofs on light industrial buildings, get seam, flashing, drain, and section repairs while the businesses below stay open. Drains and rooftop unit curbs are checked on every visit.
Each leaking space gets mapped and traced to its own source on the roof, then the repairs are combined into one visit where possible. Timing follows store hours, and the property manager passes the schedule to each tenant.
The membrane type, how many separate leak sources the spaces trace to, wet insulation under them, kitchen or equipment curbs involved, and roof access. Grouping several tenant repairs into one visit lowers setup costs.
Quiet work, such as seam cleaning and flashing prep, runs while stores are open. Hot-air welding near entrances, insulation cutting, and debris lowering are timed before opening or after close.
Active leaks go to the front of the schedule. Call with the address and where the water shows; temporary measures can slow it until the permanent repair is made on a dry day.
Either can call, though the property manager usually approves the work. Tenants can describe the stain; the manager confirms roof access and who pays under the lease.
Send the address and the spaces with stains. We will plan one visit and share photos with the property manager.